Wg Powder Coating Machine Manual Spray Gun Pem C4 Bend 0351764
WG Powder Coating Machine Manual Spray Gun PEM C4 Bend 0351764Product Description-The spray gun adopts special spray gun with built-in electrostatic generator, which can spray powder evenly and preven···
Features
WG Powder Coating Machine Manual Spray Gun PEM C4 Bend 0351764
Product Description
-The spray gun adopts special spray gun with built-in electrostatic generator, which can spray powder evenly and prevent electrostatic backflow.
-Electronic components ensure the reliability and stability of built-in voltage multiplier circuit.
-Using precision integrated circuit to complete, high efficiency, fast powder, good spraying quality, manual and automatic.
-The two-way central air pump is designed to increase the atomization air flow and improve the coating quality and powder loading rate.
-It is equipped with ground safety protection circuit to ensure the safety of workers and machines.
Suitable for many kinds of powder spraying, epoxy (commonly used), polyester, metal powder, etc.
It is suitable for high stadard professional automatic powder coating line.
The material is antistatic and can work for long time.
All spare parts are fast fit in connection and all available to change and replace.
High electrostatic to make sure the powder coating effect of product.
--TECHNICAL PARAMETER--
Dimensions | |
Length/width/height | 133.66*2.99*3.23 inch |
Weight | 555 g; 1.22 lbs |
Electrical | |
Input voltage | maximum 22 Vpp |
Input current | maximum 0.9 A |
Frequency | 19-30 kHz |
Output voltage | maximum 100 kV DC |
maximum Corona current | 120 µA |
Polarity | negative |
Construction type | in accordance with DIN EN 50177 types A-P |
Protection class | IP 54 |
Pneumatic | |
Input air pressure (atomizing air volume) | maximum 3 bar; 0.3 MPa, 43.51 psi |
Powder discharge quantity | maximum 450 g/min; maximum 0.99 lbs/min |
| Corona manual gun PEM C4 Ergo | 2305069 | - |
| Corona manual gun PEM-CG4 | 390003 | - |
| Corona automatic gun PEA-C4 Twin | 390010 | - |
| Corona automatic gun PEA-C4XL 1.1 | 390006 | - |
| Corona automatic gun PEA-C4XL 1.4 | 390007 | - |
| Corona automatic gun PEA-C4XL 1.8 | 390008 | - |
| Corona automatic gun PEA-C4 | 390004 | - |
| Tribo manual gun PEM-T3 | - | 351019 |
| Tribo manual gun PEM-T3 DDF | - | 351043 |
| Tribo manual gun PEM-CG3 | - | 351036 |
| Tribo automatic gun PEA-T3 | - | 351018 |
| Tribo automatic gun PEA-T3XL 1.1 | - | 351030 |
| Tribo automatic gun PEA-T3XL 1.4 | - | 351029 |
| Tribo automatic gun PEA-T3XL 1.8 | - | 351032 |
| Nozzel Accessory - Manual and automatic application systems | ||
| Nozzel F1 | 390324 * | - |
| Nozzel F2 | 390325 * | - |
| Nozzel F3 | 390326 * | - |
| Nozzel F4 | 2311889 * | - |
| Deflector cone D20 | 390207 * | - |
| Deflector cone D28 | 390208 * | - |
| Deflector cone D38 | 390209 * | - |
| Fan tip packaged | - | 260926 * |
| Accessory - Manual and automatic application systems | ||
| Electrode holder for fan spray nozzles for C4 guns | 390915 * | - |
| Electrode holder for round spray nozzles for C4 guns | 390916 * | - |
| Protective wedge C4 | 390310 * | - |
| Wedgetool including 20 wedges | 390900 * | - |
| CoronaStar for C4 guns | 390918 | - |
| Accessory - Manual application systems | ||
| Extension 150 mm | 2308703 | - |
| Extension 300 mm | 390977 | - |
| Extension 500 mm | 2301006 | - |
| Deflector cone Tribo Ø22 mm | - | 259474 * |
| Deflector cone Tribo Ø28 mm | - | 259475 * |
| Nozzel extension 300 mm | - | 260934 |
| Powder cup 220 CM³ | 241117 | |
| Powder cup 500 CM3 | 3050701 | |
| Powder cup 900 CM3 | 3053662 | |
Packaging & Shipping
| Packing | High quality carton and wooden box |
| Delivery Time | Four to eight days after payment by air |
Company Profile
Litone Machinery Co., Ltd. is a leading supplier in the field of electrostatic powder coatings worldwide.
From simple manual coating to fully automatic powder coating, our company provides solutions that can meet the high requirements of customers from all over the world in a wide range of industrial fields.
These findings are then integrated into the design of complex coating systems to tailor solutions for customers. Affiliated companies in Germany, the United Kingdom, the United States, Italy, France, India, Spain and Mexico and an extensive international distributor network in more than 60 countries/regions sell products to a wide range of industrial users.
The reason why we can keep our machine powder spraying rate superior to most other suppliers is based on the following reasons:
1. Gun body and cascading shell materials: We use anti-static materials to protect the high voltage when passing through the gun body.
2. Nozzle resistance: We use glass glaze resistance instead of paper film resistance, which can transmit voltage more accurately and has a longer life (that is why the life of our nozzle is 3-4 times longer than that of other nozzles)
3. Gun cable: If we use cheap cables, when the voltage is reduced by 5% from the control unit, we use cables with shielded wires to keep the voltage high.
4. Filter: We use airtac filter (not a cheap brand), which can spray clear air
5. Fuel injector: We use wear-resistant materials to extend the service life.
So if you want high quality powder spraying machine, please contact us.
If you are interested in any of products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationsships with new clients around the world.
Our Service
WeiFang Litone Powder Coating Equipment CO.,LTD specialized in producing and exporting electrostatic powder coating equipment .
We not only supply the high-quality coating equipment,but also the best service.
Our Service:
Technology consult service
After market service
Warranty service
OEM service
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.
Application
Powder Coating Machine for:
-Powder Coating Machine for Metal surface.
-Powder Coating Machine for Car wheel.
-Powder Coating Machine for Bicycle frame.
-Powder Coating Machine for Electrical Household Appliances.
-Powder Coating Machine for Aerospace Area.
-Powder Coating Machine for Fitness Equipment.
-Powder Coating Machine for Track Traffic.
-Powder Coating Machine for Medical Devices.
-Powder Coating Machine for Petroleum Pipes, Valve.
FAQ
- Who are we?
We are based in Shandong, China, start from 2013,sell to North America(25.00%),Southeast Asia(10.00%),South Asia(10.00%),Eastern Asia(10.00%),Mid East(6.00%),Africa(5.00%),Domestic Market(5.00%),Northern Europe(5.00%),Western Europe(5.00%),Southern Europe(5.00%),South America(5.00%),Central America(4.00%),Eastern Europe(3.00%),Oceania(2.00%). There are total about 11-50 people in our office.
- How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
- What can you buy from us?
Powder coating machine,powde coating line,powder coating gun,powder coating equipment,powder coating equipment parts
- Why should you buy from us not from other suppliers?
Our company has more than 10 years of experience in electrostatic spraying industry, and can provide customers with various complex spraying solutions and best services, including: spraying machine, spray gun, spray room, etc
- What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,DDP,DDU;
Accepted Payment Currency:USD,EUR,CNY,CHF;
Accepted Payment Type: T/T,L/C,MoneyGram,PayPal,Western Union;
Language Spoken:English,Chinese,Spanish,German,Russian.
No Information
You Might Also Like
Send Inquiry